Features
Autel MaxiCOM MK808 Diagnostic Tool OBD2 Scanner Auto OBD2 Code Reader Key Programmer
Specification
|
Use scene |
|
Recommended indoor |
|
Operating System |
|
Android 4.4.4 |
|
Processor |
|
Cortex-A9 processor (1.5 GHz) |
|
Memory |
|
32GB |
|
Display |
|
7 inch LCD 1024*600 |
|
Connectivity |
|
Mini USB 2.0 |
|
Sensors |
|
Ambient light sensor for brightness auto adjust |
|
Audio Input/Output |
|
Input: N/A |
|
Power and Battery |
|
3.7 V/3200 mAh lithium-polymer
battery |
|
Tested Battery Life |
|
About 4.5 hours |
|
Battery Charging Input |
|
5 V/1.5 A |
|
Power Consumption |
|
500 mA (LCD on with default brightness, Wi-Fi on) |
|
Operating Temp. |
|
0 to 55°C(14 to 131°F) |
|
Storage Temp. |
|
-20 to 60°C (-4 to 140°F) |
|
Operating Humidity |
|
5% - 95% non-condensing |
|
Dimensions (W x H x D) |
|
237.8 mm (9.4") x 148.6 mm (5.9") x 35.5 mm (1.4") |
|
Net Weight |
|
788 g (2.42 lb.) |
|
Supported Automotive Protocols |
|
ISO9141-2, ISO14230-2,ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 |
1. OBDII ENG diagnostic:
This function works for cars with OBDII protocol, reads and clears error codes.
OBDII cars includes:
USA cars after 1996, Europe cars after 2002, Aisa cars after 2008, Japan cars after 2005.
2. ENG/AT/ABS/SRS testing:
Refer to the chat below for support cars
Full Systems Diagnoses
1.Read and erase codes for all available systems using the supported protocols. The tablet type MaxiCOM diagnostic tool is the best way to display live data in text, graph & analog for easy data review;
2.Diagnose brake system if you feel the brake pedal is mushy and notice unusual odor or noise, etc.;
3.diagnose Emission System if the system is affected by vehicle age or poor quality fuel;
4.diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated;
5.diagnose Transmission if your car is slipping or difficult to shift;
6.diagnose Wiper System if you observe chattering or streaking wiper.
7.diagnose Light System if you see rapid signal blinking or dimming lights.
Special Reset Service Functions
1.Oil Reset Service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB service is important in the maintenance of electronic braking system's safety and efficiency.
3.BMS service allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF service specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS service helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS service makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.IMMO the unique function Autel MaxiCOM MK808 has at this price, is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8.ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion.
The MaxiCOM diagnostic system supports 4 methods for Vehicle Identification.
1.Auto VIN Scan
The MaxiCOM diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable ECUs and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.
2.Manual VIN Input:
For vehicles not supporting the Auto VIN Scan function, you may manually enter the vehicle VIN.
3.Automatic Selection:
The Auto VIN Scan can be selected after selecting the test vehicle manufacturer.
4.Manual Selection:
When the vehicle's VIN is not automatically retrievable through the vehicle's ECU, or the specific VIN is unknown, the vehicle can be manually selected.
Remote Technical Support
By using REMOTE DESK-users can receive ad-hoc remote support from Autel’s technical engineers, colleagues, or friends, by allowing them to control
this tablet device on their PC via the TeamViewer software.
Complete OBD2 functions
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Global Vehicle Coverage
Support many US cars after 1992, EU cars after 2002, Asia cars after 2008
Utilizes new Auto VIN ID Tech to automatically identify the vehicle's make, model and year .
Autel MaxiCOM MK808 For Abarth/Acura/Alfa/Audi/Bentley/Benz/BMW/Bugatti/Chrysler/Citroen/Dacia/Daewoo/Daihatsu/Dodge/Fiat/Ford/Ford/GM/GTR/Honda
/Hyundai/Infiniti/Isuzu/Jaguar/Jeep/Kia/Lambor Ghini/Lancia/LandRover/Lexus/LT3/Maruti Suzuki/Maserati/Maybach/Mazda/Mini/Mitsubishi/Nissan/Opel
/Peugeot/Porsche/Renault/Saab/Scion/Seat/Skoda/Smart/Sprinter/SsangYong/Subaru/Suzuki/Toyoto/Vauxhall/Volkswagen/Volkswagen CV/Volvo
Advanced Hardware
Except its widely-used software, the advanced hardware also brings glory to its smooth and fast operation.
Android-based tablet diagnostic tool greatly improves the working efficiency with performance and power optimized multi-core processor.
7 inch touchable LCD screen does a great job in the better user experience; you can directly get what you need with intuitive navigation.
32 GB memory is not only an extended storage space but a way to reduce the possible condition of slow response.
Built-in battery has up to 4.5 hours battery life giving you a worry-free operation experience.
Additional Features
1.SHOP MANAGER – You can well manage the workshop information with 3 available functions within this application: Vehicle History, Workshop Information, and Customer Manager. Intuitively look up the summarized details.
2.DATA MANAGER – The best solution for the data related operations, you can store, print, and review the saved files in Image, PDF，Review Data, Apps Uninstall or Data Logging.
Email：sales@onlinesalestech.com
Mobile: 86-18617169295
Add：NO. 15 Kuiping Road, Longgang, Shenzhen, China
